KH 4147 CHRISTMAS PYRAMID - Christmas Decor KOMPERNASS - Free user manual and instructions

USER MANUAL KH 4147 CHRISTMAS PYRAMID KOMPERNASS

GB CHRISTMAS PYRAMID

Operating Instructions

PYRAMIDE DE NOEL

Mode d'emploi

KERSTPYRAMIDE

Gebruksaanwijzing

PIRAMIDA

Instrukcja obstugi

KARACSONYIPIRAMIS

Hasznalati utasitas

JOULUPYRAMIDI

Käytöohje

JULPYRAMID

Bruksanvisning

JULEPYRAMIDE

Read these operating instructions carefully before using the appliance for the first time and preserve this manual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.

This appliance is intended for decorative purposes in domestic households and only for use in dry rooms.

This appliance is not intended for illumination purposes, for commercial or industrial applications or for use outdoors.

Important safety instructions

To avoid life-threatening electric shocks:

• Ensure that a bulb is in every bulb holder when the plug is connected to a wall socket. Touching exposed contacts in the bulb holder can be potentially fatal.
• Ensure that neither the appliance itself, the power cable nor the plug come into contact with water or other liquids.
• Use the appliance only in dry rooms, not outdoors.
• When in use, ensure that the power cable cannot become jammed/trapped or damaged in any way. Should the power plug and/or cable become damaged, arrange for it/them to be replaced by our Customer Service Department before reusing the appliance.

• Immediately remove the plug from the wall socket if the appliance fails to function correctly, falls to the floor or is visibly damaged - and especially if the glass of a bulb is broken. Then arrange for the appliance to be checked and/or repaired by Customer Services.

• After use or during extended absences, ALWAYS remove the plug from the power socket. Switching off the appliance is not sufficient because it continues to be under power for as long as the power plug is connected to the wall socket.

• Ensure that the plug is at all times easily accessible so that it may be swiftly removed in the event of danger.

To avoid the risks of fire:

• Do not connect the appliance to a wall socket should it still be in its packaging. This would lead to a build-up of heat.
• Use only spare bulbs that correspond to the details given in the technical data. Using more powerful bulbs, or those with different wattages, could lead to the other bulbs becoming too hot or to an overload of the power cable.
• Replace non-functional bulbs as soon as possible! Due to the automatic shunting of failed bulbs the electrical energy distributes itself amongst the remaining bulbs, causing them to glow more brightly. On the one side this also shortens their service life, on the other, the bulbs will become hotter.
  DO NOT place the appliance under inflammable objects, especially not under straw stars, paper, curtains or drapes.

To avoid the risk of accidents and personal injuries:

• Position the power cable in such a way that the appliance cannot inadvertently be pulled down by it.
• Do not permit children or infirm people to come into close contact with electrical appliances without supervision, they are not always able to correctly assess the potential dangers of them.
• Keep children under 3 years of age away from the appliance. They could swallow small parts from the decoration!

Technical data

Mains voltage: 220 - 240V 50Hz

Protection class: II /

Number of bulbs: 7 bulbs

Bulb type: 34V / 3W with E10 thread

Nominal power: 21 W total

Dimensions: 39,5× 34cm (W× H)

Power cable length: 1.5m

Items supplied

Appliance

Spare bulb

Operating instructions

Appliance description

Bulb
Bulb holder
3 Power switch
4 Spare bulb
5 Decoration

Utilisation

• Check to ensure that the appliance is undamaged and all parts and remnants of the packaging are removed from it.
• Check to ensure that every bulb holder ② contains a bulb ① . It could be that for transportation reasons the upper bulb ① has been screwed out. Screw this bulb back into the bulb holder ② first of all.
• Place the appliance on a level surface from which it cannot fall down.
• Completely unwind the power cable and place it such that no one can trip over it and pull the appliance down.

• Insert the power plug into a wall socket.

• Switch the appliance on or off using the power switch ③.

Changing bulbs

• First remove the plug from the wall socket. Switching off the appliance is not sufficient because it continues to be under power for as long as the power plug is connected to the wall socket.
• After immediate use, first allow the bulb to cool down.
• Always screw bulbs in and out of the bulb holder with your fingers, never use pliers or similar tools. If you do, the bulb glass could splinter.
• Use the supplied spare bulb ④ or others that meet the specifications given in the technical data. Using more powerful bulbs, or those with different wattages, could lead to the other bulbs becoming too hot or to an overload of the power cable.
• Screw the replacement bulb into the bulb holder until it is firmly seated. To avoid damage to the bulb itself, do not use excessive force.

Caution: Should the glass body of a lamp detach itself or the glass has broken:

• Immediately remove the plug from the wall socket! There is a risk to life if the protruding filaments are touched.
• Carefully attempt to unscrew the remains of the bulb from the bulb holder with long-nosed pliers, under no circumstances should you use your unprotected fingers. There is a risk of injury through broken glass.
• Make contact with Customer Services if you do not feel confident about it or were not successful in your attempt.

Cleaning

Caution! Disconnect the power plug from the power socket. Failure to do so brings with it the risk of a fatal electric shock should you come into contact with electrical parts or moisture permeates the appliance. After immediate use, first allow the bulb to cool down.

Attention Do not remove the bulbs to clean the appliance. Cleaning is not required on the insides of the bulb holders. Should soiling be present in the area of the electrical contacts its removal, due to the associated dangers, may only be carried out by Customer Services.

• Carefully pull the decoration ⑤ upwards and remove it.
• You can now clean the appliance, using only a dry or lightly moistened cloth. To avoid potential damage to the painted and plastic surfaces, do not use any cleaning agents.
  To conclude, carefully replace the decoration.

Maintenance

The appliance is maintenance-free, no effort is required on the part of the user.

• Never open the components of the appliance - there are no user-serviceable elements contained inside.
• Before taking it into use, always check the appliance for visible exterior damage.

Disposal

Do not dispose of the device in normal domestic waste.

Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.

Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

Dispose of the packaging materials in an environmentally responsible manner.

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

D-44867 BOCHUM

www.kompernass.com

Service

IE Kompernass Service Ireland

c/o Irish Connection

41 Harbour view

Howth Co. Dublin

Tel: [phone]

Fax: [phone]

e-mail: [e-mail]

Usage conforme